IT1 FAZ (Ex2/22) for connection to SysTec weighing terminals
Applications
The W&M approved IT1 FAZ remote display is designed for connection to any type of SysTec weight indicator. IT1 FAZ displays the gross or net weight as well as status information of the scale. The IT1 FAZ keyboard can be used to zero or tare the scale (in combination with IT8000E also to release the weighing sequence).
For use in hazardous areas of zones 2 and 22 SysTec offers the IT1 FAZ Ex2/22 version.
Displayed information
The high-contrast display shows the weight as well as the following scale status symbols:
- ~ Scale in motion
- o Scale in zero range
- NET Display shows net weight
- ----- Scale in overload
Construction
- Wall-mount/desk-top version
- Wall-mount or desk-top installation
- Stainless steel housing protected to IP69K (Ex version: IP65)
- Dimensions W x H x D: 168 x 177 x 115 mm
Panel-mount version
- Installation in switch cabinet or control panel
- Stainless steel housing, fascia plate protected to IP69K (Ex version: IP65)
- Dimensions W x H x D: 182 x 145 x 47 mm
Cut-out in panel: 165 x 129 mm
Display and keyboard
- Bright 4.3“ color TFT display with wide viewing angle
- (approx. 11 cm screen diagonal)
- Membrane keyboard with 5 softkeys for zero setting, taring and auxiliary function
Data transmission
Data transmission between weighing terminal and remote display IT1 FAZ or IT1 Ex2/22 is made via a plug-on interface module (SIM), optionally as:
- RS232 interface (up to 15 m) or
- RS485 4-wire interface (up to 500 m) or
- Ethernet interface
Operating temperature
–10 °C to +40 °C at a max of 95 % rel. humidity, non-condensing