IT1 FAZ (Ex2/22) for connection to SysTec weighing terminals

Applications
The W&M approved IT1 FAZ remote display is designed for connection to any type of SysTec weighing terminal. IT1 FAZ displays the gross or net weight as well as status information of the scale. The IT1 FAZ keyboard can be used to zero or tare the scale (in combination with IT8000E also to release the weighing sequence).  
For use in hazardous areas of zones 2 and 22 SysTec offers the IT1 FAZ Ex2/22 version.

Displayed information
The high-contrast display shows the weight as well as the following scale status symbols:

  • ~ Scale in motion
  • o Scale in zero range
  • NET Display shows net weight
  • ----- Scale in overload

Construction

  • Wall-mount/desk-top version
  • Wall-mount or desk-top installation
  • Stainless steel housing protected to IP69K (Ex version: IP65)
  • Dimensions W x H x D: 168 x 177 x 115 mm

Panel-mount version

  • Installation in switch cabinet or control panel
  • Stainless steel housing, fascia plate protected to IP69K (Ex version: IP65)
  • Dimensions W x H x D: 182 x 145 x 47 mm

Cut-out in panel: 165 x 129 mm

Display and keyboard

  • Bright 4.3“ color TFT display with wide viewing angle
  • (approx. 11 cm screen diagonal)
  • Membrane keyboard with 5 softkeys for zero setting, taring and auxiliary function

Data transmission
Data transmission between weighing terminal and remote display IT1 FAZ or IT1 Ex2/22 is made via a plug-on interface module (SIM), optionally as:

  • RS232 interface (up to 15 m) or
  • RS485 4-wire interface (up to 500 m) or
  • Ethernet interface

Operating temperature
–10 °C to +40 °C at a max of 95 % rel. humidity, non-condensing

    Download brochures:

    IT1 FAZ

    IT1 FAZ Ex2/22

    IT1 FAZ
    IT1 FAZ

    Wall/desk version

    IT1 FAZ
    IT1 FAZ

    Panel-mount version

    Product request

    All fields with * are mandatory